Canton DM50 Operations Instructions download pdf (Page 16)

Troubleshooting

Here is an overview of the most common problems. If you have any further questions please contact your Canton dealer,

call our Service Hotline on +49 (0) 60 83 28 70 or send us an e-mail at info@canton.de.

Problem Possible cause Solution

DM System does not

turn on.

Power cable not connected to the power outlet

and /or DM System

Check connection.

Sound reproduction

too soft.

Volume of DM System set too low. Increase the volume using the “Volume” button.

Increase the volume of the source device.

DM System does not

respond to remote

control.

The battery is empty. Replace battery, observe correct polarity at insertion.

No sound

reproduction.

1. Sound format of the source device wrongly

selected (Digital input “TV” and “DVD”)

1. Please check the correct setting of your source device (see

Page 6). “DTS” or “Dolby Digital” coded output formats

cannot be reproduced.

2. Source device not producing any signal. 2. Digital output on the source device not activated (please

refer to device instructions).

3. Cable not correctly connected / faulty cable. 3. Check the connection of the source device to the DM

System and change the cable where necessary.

English

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23

No comments

Canton DM50 Operations Instructions Page 16